Accelerator Pedal Linkage Kit RHD 1968 only. SCHBB061

SHOP > Bay Window 68-79 > Gearbox/Hand + Foot Controls/Cables > Accelerator Linkage Upgrade Kits

Accelerator Pedal Linkage Kit RHD 1968 only. SCHBB061

  • Accelerator Pedal Linkage Kit RHD 1968 only. SCHBB061

  • SCHBB061
  • Was £75.00 - Now £67.50!
    inc. VAT (where applicable)

:  at  £67.50  each


These kits are a great upgrade on your original pedal assembly, and very simple to install. This fits 1968 baywindow. 

This accelerator pedal linkage upgrade kit from Buttys Bits for VW Baywindow 1968 right hand drive converts your throttle pedal from a worn vague on/off switch to a smooth progressive control and transforms the driveability of your bus.

The kit consists of: A laser cut 5mm steel replacement pivoting linkage complete with sealed ball bearing swivel section Upgraded linkage from the pedal with bolted rose joints Rose jointed link rod return spring & mounting hardware When bolting the end of your throttle cable to the linkage, tighten then undo by a half turn to allow the cable to rotate freely. Use the supplied return spring if the kit is being used with a standard carburretor. Twin carburretors will have their own return springs which are stronger than stock springs.

Customers Also Bought